Description
Shurflo 9300 Series Solar Water Pumping Kit, 230 Feet Head Height (NO Pole Mount)
This Solar Water Well Pumping system can pump 1.36 gallons per minute at a max of 230′, lower head distances will increase flow rate (see table below). If you would like to check out a similar kit but include the pole mount for the solar panel go here –Â Shurflo 9300 Solar Water Pumping Kit, 230 feet With Pole Mount
Kit Details:
- Shurflo 9300 Submersible Pump
- Shurflo 9300 series 902-100 (LCB-O) pump controller
- 2 x 80w 12v Solarland USA solar panels
Note:
- The solar panels must be wired in series for a 24v output. The 902-100 (LCB-O) pump controller must be mounted in a dry location.
- For water pump cable please see the following links 10/2 without ground. We recommend the 902-200 (LCB-G)controller for solar water pumping systems with a battery bank since a system with the 902-100 (LCB-O) would require an additional charge controller if a battery bank was required.
Check out other Shurflo 9300 Pre-designed Deep Well Solar Water Pumping Kits Here
-
Shurflo 9300 Series Solar Water Pumping Kit System up to 120 feet With Pole Mount
-
Shurflo 9300 Series Solar Water Pumping Kit System up to 120 feet No Pole Mount
-
Shurflo 9300 Series Solar Water Pumping Kit System up to 230 feet With Pole Mount
Â
|
||
|
||
  |
|
Array Direct Performance (24V array) |
|||
|
Vertical lift |
Minimum solar array size |
Flow rate (gpm) |
Amps @ 30V |
|
20 |
2 x 32 watts |
1.95 |
1.5 |
|
40 |
2 x 32 watts |
1.90 |
1.7 |
|
60 |
2 x 50 watts |
1.81 |
2.1 |
|
80 |
2 x 50 watts |
1.76 |
2.4 |
|
100 |
2 x 50 watts |
1.71 |
2.6 |
|
120 |
2 x 50 watts |
1.68 |
2.8 |
|
140 |
2 x 80 watts |
1.65 |
3.1 |
|
160 |
2 x 80 watts |
1.63 |
3.3 |
|
180 |
2 x 80 watts |
1.55 |
3.6 |
|
200 |
2 x 80 watts |
1.52 |
3.8 |
|
230 |
2 x 80 watts |
1.36 |
4.1 |
Â
