RAB 12v Motion Sensor Switch
RAB motion and heat sensing switch is 12-volt DC powered so it works full time even if your inverter is in standby or off. Turns lights on at approach, and holds for adjustable time, 5 seconds to 20 minutes after motion stops. Sensitivity distance is adjustable, up to about 50 feet out, farther in colder weather. Connect directly to any 12-volt light, or use a 12-volt relay to switch 120-volt lights. Set for night only operation, or use as security alarm, by setting for day/night operation. Switches – amp DC, uses only 7 milliamps at idle, 40 milliamps when activating. Switch uses only 7 milliamps at idle.