Outback FX2024ET Sealed Inverter Charger, 2000W, Off-Grid, 12 VDC, 230 VAC, 50 H

$2,931.10

Last updated on July 15, 2024 3:06 am

Out of stock

Compare

Description

Outback FX2024ET Sealed Inverter Charger, 2000W, Off-Grid, 24 VDC, 230 VAC, 50 Hz

230 VAC/50 Hz International Model
Manufacturer Part Number: FX2024ET 

This 230 VAC inverter is for export, primarily to European countries.

The OutBack FX Inverter is a modular “building block” sine wave inverter/charger which can be used for both small and large power systems. Each OutBack FX inverter/charger module is a complete power conversion system – DC-to-AC inverter, battery charger and AC transfer switch.

Additional inverter/chargers can be connected at any time in either parallel (230 VAC), or even three-phase (230/400 VAC) configurations. This allows the system to be tailored to the specific power conversion requirements of the application, both at the time of the installation and in the future. Up to eight FX inverter/chargers can be connected together to provide up to 20 kW of continuous power conversion capacity. The OutBack FX inverter/charger system is designed for both residential and commercial stand-alone and utility-interactive applications with battery energy storage.

Features

  • Powder-coated all aluminum die-cast chassis
  • Internal electronic components are cooled by heat transfer
  • Gaskets on all openings to provide water resistance
  • Sealed design protects internal electronics from salt, dirt or contaminated air, bugs, critters, mold, etc.
  • Conformal coated circuit boards to resist corrosion
  • Designed to allow easy field servicing and repair

Applications

  • Hot and humid climates where a protected area is not available for installation of the inverter/charger system
  • Salt air environments such as Hawaii where you can’t get away from the salt air and where there is little difference between indoors and outdoors
  • Dirty environments where dust or drifting organic matter such as cottonwood could clog air openings in an unattended system
  • Boats and RV’s where water might splash on the inverter
  • Greater control of unwanted radio frequency interference

Specifications

Sealed Models
FX2012ET FX2024ET FX2348ET
Nominal DC Input Voltage 12 VDC 24 VDC 48 VDC
Continuous
Power Rating
at 25° C
2000 VA 2000 VA 2300 VA
AC Voltage and Frequency 230 VAC
50 Hz
230 VAC
50 Hz
230 VAC
50 Hz
Continuous
AC RMS Output
at 25° C
8.7 amps AC 8.7 amps AC 10.0 amps AC
Full Idle Power ˜ 20 Watts ˜ 20 Watts ˜ 23 Watts
Search 6 Watts
Typical
Efficiency
90% 92% 93%
Typical Total Harmonic
Distortion
2% 2% 2%
Maximum 5% 5% 5%
Output
Voltage
Regulation
+/- 2% +/- 2% +/- 2%
Peak
Maximum
Output Current
28 amps AC 35 amps AC 35 amps AC
RMS 20 amps AC 25 amps AC 25 amps AC
Surge AC
Overload
Capability
4600 VA 5750 VA 5750 VA
5 Second 4000 VA 4800 VA 4800 VA
30 Minutes 2500 VA 3100 VA 3100 VA
AC Input
Current
Maximum
30 amps AC 30 amps AC 30 amps AC
AC Input
Voltage Range
(MATE Adjustable)
160 – 300 VAC
AC Input
Frequency Range
44 – 56 Hz
DC Input
Voltage Range
10.5 – 17.0
VDC
21.0 – 34.0
VDC
42.0 – 68.0
VDC
Continuous
Battery Charge Output
100 amps DC 55 amps DC 35 amps DC
Warranty Standard 2 year / Optional 5 year
Unit Weight 56 lbs (25 kg)
Dimensions
(H x W x L)
13 x 8.25 x 16.25″ (33 x 21 x 41 cm)