Outback FX2012MT Sealed Inverter, 2000W, RV Mobile Use , 12 VDC, 120 VAC


Last updated on June 3, 2024 1:41 pm


Outback FX2012MT Sealed Inverter, 2000W, RV Mobile Use , 12 VDC, 120 VAC

Inverters with an M- suffix are RV or Marine versions. They have a transfer switch that switches hot and neutral.

The FX series is designed to survive in environments that would normally destroy other inverter/chargers. Protection for internal components is provided by our die-cast aluminum chassis with a powder coated finish to prevent corrosion. Internal and external cooling fins allow for passive heat transfer, enabling peak operating efficiencies as high as 93% and looking cool while doing it. Water and small particles are kept out through the generous use of gaskets and 0-ring seals on all seams and openings. A protective conformal coating on all circuit boards provides the final line of defense against corrosion. The now standard externally mounted “TURBO” cooling system improves performance in hot conditions.

  • Powder-coated all aluminum die-cast chassis
  • Internal electronic components are cooled by heat transfer
  • Gaskets on all openings to provide water resistance
  • Sealed design protects internal electronics from salt, dirt or contaminated air, bugs, critters, mold, etc.
  • Conformal coated circuit boards to resist corrosion
  • Designed to allow easy field servicing and repair


  • Hot and humid climates where a protected area is not available for installation of the inverter/charger system
  • Salt air environments such as Hawaii where you can’t get away from the salt air and where there is little difference between indoors and outdoors
  • Dirty environments where dust or drifting organic matter such as cottonwood could clog air openings in an unattended system
  • Boats and RV’s where water might splash on the inverter
  • Greater control of unwanted radio frequency interference


Continuous Output Power: 20000 VA
Continuous Output Current at 25 degrees: 17 amps AC RMS
Idle Power (120 VAC Output No Load): 19-21W DC
Output Voltage: 120 VAC/60 Hz
DC Input Voltage (Nominal): 12 VDC
Peak Efficiency: 91%
Output Voltage Regulation: +/-2% typical
Continuous DC Charge Rate: 100 Amps DC
Frequency Range: 50-70 Hz
DC Input Voltage Range: 10-16 VDC
Dimensions (HxWxL): 13″ x 8.25″ x 16.25″ / 33 x 21 xz 41 cm
Weight: 62.6 lbs. / 28.4kg