Description
IOTA DLS-240-27-40 CONVERTER / CHARGER
The DLS-240-27-40 Power Converter/Battery Charger from IOTA Engineering converts nominal 216-264 AC voltage to 27.2 DC voltage for both DC load operation and 24V battery charging.
As a power supply, the unit’s tightly controlled regulation allows the user to operate a nominal 24VDC load up to 40 amps.
As a battery charger, the unit will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time to minimize undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the DLS-240-27-40 will automatically drop the current, providing a float-charge to the battery to prevent self-discharge of the cells.
The DLS-240-27-40 features a standard IEC receptacle for inserting an AC power cord. The AC power cord is not supplied with the unit. Always use an appropriately rated cord (at least 16 gauge) for connection to the AC input.
|
|
|
INPUT VOLTAGE |
216-264 VAC
|
|
INPUT FREQUENCY |
50-60 Hz
|
|
OUTPUT VOLTAGE |
27.2 VDC
|
|
OUTPUT AMPERAGE |
|
40 Amps |
|
-
Features
-
-
-
Switch-mode technology
-
Exceptionally clean DC output
-
Tight line-load regulation
-
Quickly and efficiently charges batteries
-
Designed to withstand low transient AC line voltage
-
Current limit and thermal/overload protection
-
Lower operating temperature
-
Quiet fan operation
-
External reverse polarity fuse protection from incorrect battery connection
-
High and normal-stage charging jack
-
Compatible with the IOTA IQ4 Charge Controller
|
|
SPECIFICATIONS |
|
DC Output Voltage (No Load) approx. |
27.2V (DC) |
|
Output Voltage Tolerance (No Load) |
+ or – .7% |
|
Output Amperage, Max Continuous |
40 Amps |
|
Output Voltage (Full Load) approx. |
>27.0V (DC) |
|
Maximum Power Output, Continuous |
1100 Watts |
|
Ripple and Noise |
<100 mV rms |
|
Input Voltage Range |
216-264V (AC) |
|
Input Voltage Frequency |
47-63 |
|
Maximum AC Current @ 216VAC |
10.0 Amps |
|
Typical Efficiency |
>80% |
|
Max Inrush Current, Single Cycle |
40 Amps |
|
|
Short Circuit Protection |
Yes |
|
Overload Protection |
>100% |
|
Line Regulation |
100 mV rms |
|
Load Regulation |
<1% |
|
Fan Control |
Proportional |
|
Thermal Protection |
YES |
|
Working Temperature Range |
0°- 40°C |
|
Storage Temperature |
-20° to 80°C |
|
Withstand Voltage (VDC)* |
1700/1700/500 |
|
Dimensions |
13″ x 6.5″ x 3.4″ |
|
Weight |
7.8 lbs |
|
