400A CL-T FUSE & HOLDER W/ STUDS
Class T Fuse Blocks with Fuses
Use these single-pole fuse blocks to fuse inverters or other large loads. Holders with set screw lugs accept up to 2/0 wire in the 110A and 200A sizes and up to 4/0 wire in the 300A and 400A sizes. On stud mount holders, a 5/16″ bolt at each end of the fuse allows connection of a cable with a ring lug terminal end. To connect an inverter, order two cables with lugs on both ends: one to go from the battery to the fuse and one to go from the fuse to the inverter. Class T fuses exceed the 10,000-amp interrupting capacity (AIC) required to protect Square-D brand circuit breakers in DC load centers. They are UL Listed for up to 160VDC and NEC approved for inverter use. A fuse comes installed in the block. Order spare fuses separately.