1530W Flexpower Off-Grid Pre-Designed Solar System for 24v Battery Bank

$9,253.30

Last updated on March 24, 2023 2:23 am
Compare

Description

1530W Flexpower Off-Grid Pre-Designed Solar System for 24v Battery Bank

This expandable 1,530 watt off-grid system has a pre-wired power center that makes it easy to install. The OutBack Flexpower is pre-wired with all of the essential protective devices in the smallest possible space at the lowest installed cost making it ideal for applications with modest power requirements such as cabins, weekend get-a-way homes, and remote communication sites as well as back-up power systems homes. Utilizing an extremely compact design and an easy-to-install mounting bracket, the fully pre-wired and tested Flexpower ONE System is engineered for a quick installation, saving both time and money. The pre-wired power center comes with an OutBack charge controller already mounted. OutBack charge controllers have maximum power point tracking with an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from the 1,530 Watt solar array. With a 24v battery bank the FM80 charge controller can take up to 2,400w of solar power, however because we need to keep the series strings of panels in sets of three panels ( due to the Max Voc input of 150V to the charge controller) a total of 9 x 255w solar panels can be used with the FM80 charge controller.

Flexpower by Outback includes a single AC inverter, AC and DC wiring boxes, a single Flexmax battery charge controller, MATE monitor, HUB, Flexnet DC and lighting surge protector. All this wrapped up in a 1,560w off-grid kit with a small power center footprint. The Flexpower System is also equipped with battery and breakers, a GFDI breaker, an input-output-bypass assembly, mounting locations for both AC GFCI Type B and EU Type F style outlets and additional AC breakers.

This expandable system has 25 year guaranteed UL listed solar panels, UL listed combiner box and we supply all the connectors from the panel to the box. You supply the conduit and wire from the box to the power center which is indoor rated. The 1,530 watt Off grid system is the only choice when you need a fully integrated off-grid system with pure sine wave inverter all pre-wired ready for you to add your own rack or select one of ours. With this pre-wired system you can save yourself thousands of dollars over the cost of hiring a contractor to install your system.

 

What’s included:

  • 6 – 255 Watt Solar Panels (Canadian Solar)
  • 1 – Outback FlexPower One FP1-1 Power Center Fully Assembled
  • Prewired AC and DC boxes with 120VAC Bypass and Type B Outlet
  • 250ADC breaker GFDI
  • 80 amp Power Center breaker
  • Outback VFX3524 Inverter or GVFX3524 Inverter
  • Remote Temperature Sensor
  • Outback Flexmax 80 Charge Controller
  • Flexnet DC and surge protector for 120V 60Hz applications.
  • MidNite MNPV-3, 3 Position Combiner Box w/Breakers
  • 2- 10 AWG – 30′ Cable Extension (PV wire from panels to combiner)
  • 2 – 4/0 – 96″ Battery Cable, Dual Kit (1 red, 1 black)

Lead Times for Shipping

Panels and balance of system ship in 3 – 5 business days after funds clear. OutBack FLEXpower™ ONE FP1-GVFX3524 power centers are usually in stock but are subject to inventory availability. Because of the popularity of the FLEXpower™ ONE; allow 10 business days to ship. (Subject to Seasonal Increases)

Off Grid or Grid Tied

FLEXpower™ ONE FP1-GVFX3524 & FP1-GVFX3648 inverters are designed to work off-grid and also interact with the grid to back feed power. If you have a generator you should be aware that the GVFX3524 inverters will only sync with Honda EU generators because they produce pure sine wave power. If you intend to use your system completely off grid (No Grid Tie Ever), you may want to have us switch to the VFX3524 inverters for your FLEXpower™ ONE system at no additional charge to you because the VFX3524 will interface with a wider variety of generators. Should you choose to make that change, just notify us in the comment box at the time of checkout or when you are contacted by the technical consultant assigned to your purchase.

Mounting and Battery Options

Roof or ground racks and batteries are not included in the base price of the kit because they are site specific options. Mounting on the roof or ground, types of attachment are individual’s specific property requirements. There are options below for racking (roof or ground), and batteries to accommodate nearly every application you might encounter.

Other Materials Needed

Some additional items sourced from your local hardware store that you may need to purchase are: Conduit, appropriately sized electrical wire from the combiner box to the location of the power panel, some fasteners, sealant, grounding rod and wire to complete the final connection to your main panel or sub panel.

Quick Comparison

Settings1530W Flexpower Off-Grid Pre-Designed Solar System for 24v Battery Bank removeOutback Flexpower Radian FPR-4048a Pre-wired System, 4KW, 120/240VAC, 48VDC 1 X removeGrundfos SQFlex Pre-designed Solar Water Pumping Kit using 3 sqf-3 pump 2.5 to 2 remove885W Off Grid Solar Electric System with Top of Pole Mount (price includes shipp remove2040W Flexpower Off-Grid Pre-Designed Solar System incl Mount and 48v 428AH Batt remove2040W Flexpower Off-Grid Pre-Designed Solar System incl Mount and 48v 428AH Batt remove
ImagePlaceholderPlaceholderPlaceholderPlaceholder
SKUE37E3DF06D24ACFC7CF5380C8C4127FAD05836FA78FABBFD
Rating
Price$9,253.30$10,767.40$5,910.30$10,185.60$15,008.20$13,668.90
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

1530W Flexpower Off-Grid Pre-Designed Solar System for 24v Battery Bank

This expandable 1,530 watt off-grid system has a pre-wired power center that makes it easy to install. The OutBack Flexpower is pre-wired with all of the essential protective devices in the smallest possible space at the lowest installed cost making it ideal for applications with modest power requirements such as cabins, weekend get-a-way homes, and remote communication sites as well as back-up power systems homes. Utilizing an extremely compact design and an easy-to-install mounting bracket, the fully pre-wired and tested Flexpower ONE System is engineered for a quick installation, saving both time and money. The pre-wired power center comes with an OutBack charge controller already mounted. OutBack charge controllers have maximum power point tracking with an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from the 1,530 Watt solar array. With a 24v battery bank the FM80 charge controller can take up to 2,400w of solar power, however because we need to keep the series strings of panels in sets of three panels ( due to the Max Voc input of 150V to the charge controller) a total of 9 x 255w solar panels can be used with the FM80 charge controller.

Flexpower by Outback includes a single AC inverter, AC and DC wiring boxes, a single Flexmax battery charge controller, MATE monitor, HUB, Flexnet DC and lighting surge protector. All this wrapped up in a 1,560w off-grid kit with a small power center footprint. The Flexpower System is also equipped with battery and breakers, a GFDI breaker, an input-output-bypass assembly, mounting locations for both AC GFCI Type B and EU Type F style outlets and additional AC breakers.

This expandable system has 25 year guaranteed UL listed solar panels, UL listed combiner box and we supply all the connectors from the panel to the box. You supply the conduit and wire from the box to the power center which is indoor rated. The 1,530 watt Off grid system is the only choice when you need a fully integrated off-grid system with pure sine wave inverter all pre-wired ready for you to add your own rack or select one of ours. With this pre-wired system you can save yourself thousands of dollars over the cost of hiring a contractor to install your system.

 

What's included:

  • 6 - 255 Watt Solar Panels (Canadian Solar)
  • 1 - Outback FlexPower One FP1-1 Power Center Fully Assembled
  • Prewired AC and DC boxes with 120VAC Bypass and Type B Outlet
  • 250ADC breaker GFDI
  • 80 amp Power Center breaker
  • Outback VFX3524 Inverter or GVFX3524 Inverter
  • Remote Temperature Sensor
  • Outback Flexmax 80 Charge Controller
  • Flexnet DC and surge protector for 120V 60Hz applications.
  • MidNite MNPV-3, 3 Position Combiner Box w/Breakers
  • 2- 10 AWG - 30' Cable Extension (PV wire from panels to combiner)
  • 2 - 4/0 - 96" Battery Cable, Dual Kit (1 red, 1 black)

Lead Times for Shipping

Panels and balance of system ship in 3 - 5 business days after funds clear. OutBack FLEXpower™ ONE FP1-GVFX3524 power centers are usually in stock but are subject to inventory availability. Because of the popularity of the FLEXpower™ ONE; allow 10 business days to ship. (Subject to Seasonal Increases)

Off Grid or Grid Tied

FLEXpower™ ONE FP1-GVFX3524 & FP1-GVFX3648 inverters are designed to work off-grid and also interact with the grid to back feed power. If you have a generator you should be aware that the GVFX3524 inverters will only sync with Honda EU generators because they produce pure sine wave power. If you intend to use your system completely off grid (No Grid Tie Ever), you may want to have us switch to the VFX3524 inverters for your FLEXpower™ ONE system at no additional charge to you because the VFX3524 will interface with a wider variety of generators. Should you choose to make that change, just notify us in the comment box at the time of checkout or when you are contacted by the technical consultant assigned to your purchase.

Mounting and Battery Options

Roof or ground racks and batteries are not included in the base price of the kit because they are site specific options. Mounting on the roof or ground, types of attachment are individual's specific property requirements. There are options below for racking (roof or ground), and batteries to accommodate nearly every application you might encounter.

Other Materials Needed

Some additional items sourced from your local hardware store that you may need to purchase are: Conduit, appropriately sized electrical wire from the combiner box to the location of the power panel, some fasteners, sealant, grounding rod and wire to complete the final connection to your main panel or sub panel.

Outback Flexpower Radian FPR-4048a Pre-wired System, 4KW, 120/240VAC, 48VDC 1 X FM100

PLEASE NOTE: FPR-4048A has single FM80 charge controller only.

The OutBack FLEXpower FPR pre-wired power panels integrate Radian inverter/chargers, FM100 charge controls, and all of the essential protective devices in an easy-to-install, fully pre-wired and factory-tested system. FLEXpower FPR systems are available with either 4.0 kW or 8.0 kW inverter sizes. The Radian inverters can be used for either grid-tied or off-grid systems and have the capacity to use and charge any technology batteries, as well as advanced OutBack features including Grid Zero and Offset modes. Dual AC inputs allow connection to both the utility and a backup generator set. Compatible with system monitoring and control via OpticsRE. Utilizing a compact all-on-one mounting plate design, they are fully pre-wired and factory-tested.

Each FPR is designed for 120/240 VAC single-phase output. Each power panel includes one inverter/ chargers, one or two FM80 charge controllers, FlexNetDC, AC and DC wiring box, a MATE3, HUB10, inverter and controller breakers with GFDI, and an AC Input-Output-Bypass Assembly. FLEXpower components are listed to applicable UL standards and the assemblies are marked for streamlined inspections. Dimensions are 47"H x 33.5"W x 9.84"D. Weight is 195 lbs for the FPR-4048A and 250 lbs for the FPR-8048A

Grundfos SQFlex Pre-designed Solar Water Pumping Kit using 3 sqf-3 pump 2.5 to 2 gpm, 260 to 655 feet lift 5 Yr Warranty

This Grundfos Predesigned Solar water pumping kit includes 2 x 330w Solar Module wired in series (positive to negative) for high voltage input to the pump and or controllers. From the solar panel array we would go to the MNPV3 combiner box using the included MC4 extension cable. The Grundfos solar water pumping kit include a top of pole solar panel mount is made specifically for these solar panels. The customer is responsible for purchasing the schedule 40 steel pipe the mount requires. This pipe is normally available locally at fencing suppliers or steel suppliers. The included grounding lugs for the solar panels and mount will connect to a customer supplied 6awg bare copper stranded wire to the combiner box and then to a grounding electrode driven near the array into the ground.

In the combiner box we would have a 15a DC breaker rated for 150vdc for up to 3 panels or a 15a 300vdc breaker for up to 6 panels in series for arrays of 8 panels we would suggest two 300vdc breakers in the combiner box. The combiner box would also house a lightning arrestor.

A lightning arrestor is required with the Grundfos extended warranty (not included with this Grundfos Solar Water pumping kit). The Extended warranty extends the warranty period to a total of 5 years. From the combiner box the positive and negative outputs would go to the Grundfos CU200 controller and then directly  to the Grundfos SQflex 3 SQF 3 pump itself. The Grundfos SQflex pump has a total of three wires. The yellow and green wire is the ground with the other two wires being non polarity sensitive. The wire is connected to the pump via the included underwater splice kit

The Grundfos CU200 controller provides a combined status and control unit for the SQFlex pump kit system. The CU200 includes a digital display that provides information on the power the pump is using and will display fault codes for troubleshooting the system if needed. Additionally, the CU 200 enables connection of a level switch placed in a water reservoir or tank. A reverse action pressure switch is used in situations were a float valve is required in most cases this is due to the 2000 feet max distance between the cu200 and the float switch. We have found also that keeping the cu200 and pump within 650 feet is preferred.

The Optional Grundfos IO101 controller ( not included) provides easy transfer between the solar array and an ac source such as a generator or grid power. The US version of the IO101 can only take max of 120vac even though Grundfos SQflex pump is good up to 240vac.

The 10/2 with Ground submersible pump cable is not included since the placement of the pump in most cases varies, in calculating the flow rates and vertical lift the calculations are based on the static water level rather than the pumps depth in the well. The Grundfos SQFLex pumps have a maximum submergence level of 500 feet from static water level.

Depending on the distance from your solar panels to the well head you may want to run underground feeder cable (UF wire) to save money and splice in the submersible pump cable at the well head. The connection to the pump would be done with an underwater splice kit.

There are also additional items to complete the system that are generally available locally and include:

  • 6 awg copper stranded wire for grounding solar panels to combiner and then to electrode.
  • 8’ Grounding electrode and wire clamp
  • Concrete and rebar for the mount hole (we can provide dimensional drawing for hole)
  • sch 40 steel pipe for mount
  • Screws to mount combiner box and controller to the pole/mount.
  • Zip ties to attach MC4 extension cables to mount frame.
  • Electrical Conduit to go from solar panels to combiner box and then to below ground
  • ??’ 10/2 w/ ground UF wire from combiner box to well head, you could use same sub pump cable although UF wire is cheaper.
  • ??" diameter drop pipe to pump,  diameter dependent on pump model.
  • 3/8 “ Polypropylene Safety rope (not required if using galv steel pipe)

 

Items:

330w Solar Module  x2

 

MC4 Solarline 2 PV Array Output Cable 30' #10 AWG

 

Midnite Solar MNPV3 Combiner Box for 3 150VDC or 600VDC breakers

 

LA302DC Delta Lightning Arrestor to 0-300VDC
- Mounting Bracket Required: No

 

 

DIN Rail 150VDC Breaker
- Amps: 15A

 

GROUNDING, LAY-IN LUG, TIN PLATED CU W/SS SCREW, UL-LISTED, DIRECT BURIAL, W/#10-32 SS THREAD-FORMING SCREW, 10 PC

 

Splice Kit for Submersible Solar Water Pump Wire

 

Grundfos SQFlex 3 SQF-3 Solar Submersible Pump

 

Grundfos SQFlex CU200 Interface Box Pump Controller
- Level Switch Required: No

 

Grundfos SQFlex Water Level Switch (use with CU200 only)

 

Sun-Rac mounting kit for 2 panels

plus 5 year extended warranty

885W Off Grid Solar Electric System (with Top of Pole Mount)
**********SHIPPING INCLUDED IN PRICE********
This system is used by one of our customers who uses it to power two circuits in his home in the event of a blackout. It can be used equally well as an off grid system for an off grid home or cabin.
The system starts with the solar panels wired in two series strings on the pole mount to the combiner box mounted to the side of the pole. The combiner box is then wired to the Midnite Solar E-panel which houses all the necessary breakers and disconnects. The E-panel provides a mount for the Outback VFX3648 Inverter and the Outback Flexmax MPPT charge controller. The E-panel has all the necessary adaptors to contain wiring to and from the inverter making a very neat and easy installation.
The output of this system varies depending upon where you live and what time of the year it is.  Expect more ouput in the summer (highest output period) and less in the winter (lowest output period).
Products Included: 4 x Canadian Solar CS6K-295M 295w Solar Panels
1 x GS Pole Top Mount for 4 x 295w Solar Panels
1 x Outback VFX3648 Off Grid Inverter Charger, 3600 Watt, 48 Volts 120 VAC/60 Hz Vented
1 x OutBack FLEXmax 60, FM60, MPPT Charge Controller, 60 amp, 12, 24, 36, 48, or 60 Volt
1 x OutBack Power MATE Surface Mount Digital Display and System Control
1 x Outback RTS Remote Battery Temperature Sensor
2 x DIN Rail 150VDC Breaker  10A 1 x Midnite Solar MNPV3 Combiner Box for 3 150VDC or 600VDC breakers
1 x DC Ground Fault Protection Circuit Breaker 63 Amp 150 VDC
1 x LA302DC Delta Lightning Arrestor to 0-300VDC
1 x Midnite Solar MNE-175AL-PLUS White Aluminum Outback Power Panel 175A INVERTER BREAKER w/ charge controller mount
6 x Grounding Lugs with Set Screws
1 x DIN Rail 150VDC Breaker  60A 1 x DIN Rail 150VDC Breaker  20A
2 x MC4 15 foot Array Output Cables
Items not included:
4 inch scedule 40 or 80 pole for mount. (Source locally at steel supply)
Wiring between combiner box and E-panel (Size dependant on distance)
Grounding wire (usually bare #6 copper stranded)
Batteries, battery interconnects and inverter cables (Batteries available here and cables available here)
Conduit and conduit fittings. ( Source locally at most hardware stores)
Please call to speak to a sales representative to learn about other options which may be available.
Shipping details: Most products take 10-14 days to be delivered. Batteries, module and mounting systems may be shipped by truck freight and usually take 1-2 weeks to be delivered.

NOTE: Always consult a licensed electrician before installing your electrical components.

2040W Flexpower Off-Grid Pre-Designed Solar System incl Mount and 48v 400AH AGM Battery Bank

This expandable 2040 watt off-grid system has a pre-wired power center that makes it easy to install. The OutBack Flexpower is pre-wired with all of the essential protective devices in the smallest possible space at the lowest installed cost making it ideal for applications with modest power requirements such as cabins, weekend get-a-way homes, and remote communication sites as well as back-up power systems homes. Utilizing an extremely compact design and an easy-to-install mounting bracket, the fully pre-wired and tested Flexpower ONE System is engineered for a quick installation, saving both time and money. The pre-wired power center comes with an OutBack charge controller already mounted. OutBack charge controllers have maximum power point tracking with an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from the 2040 Watt solar array. With a 48v battery bank the FM80 charge controller can take up to 4000w of solar power, however because we need to keep the series strings of panels in sets of three panels ( due to the Max Voc input of 150V to the charge controller) a total of 12 x 340w solar panels can be used with the FM80 charge controller.

Flexpower by Outback includes a single AC inverter, AC and DC wiring boxes, a single Flexmax battery charge controller, MATE monitor, HUB, Flexnet DC and lighting surge protector. All this wrapped up in a 2040w off-grid kit with a small power center footprint. The Flexpower System is also equipped with battery and breakers, a GFDI breaker, an input-output-bypass assembly, mounting locations for both AC GFCI Type B and EU Type F style outlets and additional AC breakers.

This expandable system has 25 year guaranteed UL listed solar panels, UL listed combiner box and we supply all the connectors from the panel to the box. You supply the conduit and wire from the box to the power center which is indoor rated. The 2040 watt Off grid system is the only choice when you need a fully integrated off-grid system with pure sine wave inverter all pre-wired ready for you to add your own rack or select one of ours. With this pre-wired system you can save yourself thousands of dollars over the cost of hiring a contractor to install your system.

 

What's included:

  • 6 - 340 Watt Solar Panels (Canadian Solar or Mission Solar)
  • 1 - Outback FlexPower One FP1-1 Power Center Fully Assembled
  • Prewired AC and DC boxes with 120VAC Bypass and Type B Outlet
  • 250ADC breaker GFDI
  • 80 amp Power Center breaker
  • Outback VFXR3648-A Inverter
  • Remote Temperature Sensor
  • Outback Flexmax 80 Charge Controller
  • Flexnet DC and surge protector for 120V 60Hz applications.
  • MidNite MNPV-3, 3 Position Combiner Box w/Breakers
  • 2- 10 AWG - 30' Cable Extension (PV wire from panels to combiner)
  • 2 - 2/0 - 96" Battery Cable, Dual Kit (1 red, 1 black)
  • 7 - 2/0 - 8" Black/ Red Battery Interconnect Cables
  • 8 x Centennial CB6-400 AGM 400AH L16 Batteries
  • DPW Low Profile Roof Ground Mount for 6 type G Modules

Lead Times for Shipping

Panels and balance of system ship in 3 - 5 business days after funds clear. OutBack FLEXpower™ ONE FP1-VFX3648 power centers are usually in stock but are subject to inventory availability. Because of the popularity of the FLEXpower™ ONE; allow 10 business days to ship. (Subject to Seasonal Increases)

Off Grid or Grid Tied

FLEXpower™ ONE FP1-VFXR3648A inverters are designed to work off-grid and also interact with the grid to back feed power.

Mounting and Battery Options

Roof or ground racks and batteries are included in the base price of the kit however there are other options available for mounting such as top of pole or the more economical rail systems to meet individual's specific property requirements.

Other Materials Needed

Some additional items sourced from your local hardware store that you may need to purchase are: Conduit, appropriately sized electrical wire from the combiner box to the location of the power panel, some fasteners, sealant, grounding rod and wire to complete the final connection to your main panel or sub panel.

2040W Flexpower Off-Grid Pre-Designed Solar System incl Mount and 48v 428AH Battery Bank

This expandable 2040 watt off-grid system has a pre-wired power center that makes it easy to install. The OutBack Flexpower is pre-wired with all of the essential protective devices in the smallest possible space at the lowest installed cost making it ideal for applications with modest power requirements such as cabins, weekend get-a-way homes, and remote communication sites as well as back-up power systems homes. Utilizing an extremely compact design and an easy-to-install mounting bracket, the fully pre-wired and tested Flexpower ONE System is engineered for a quick installation, saving both time and money. The pre-wired power center comes with an OutBack charge controller already mounted. OutBack charge controllers have maximum power point tracking with an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from the 2040 Watt solar array. With a 48v battery bank the FM80 charge controller can take up to 4000w of solar power, however because we need to keep the series strings of panels in sets of three panels ( due to the Max Voc input of 150V to the charge controller) a total of 12 x 340w solar panels can be used with the FM80 charge controller.

Flexpower by Outback includes a single AC inverter, AC and DC wiring boxes, a single Flexmax battery charge controller, MATE monitor, HUB, Flexnet DC and lighting surge protector. All this wrapped up in a 1,560w off-grid kit with a small power center footprint. The Flexpower System is also equipped with battery and breakers, a GFDI breaker, an input-output-bypass assembly, mounting locations for both AC GFCI Type B and EU Type F style outlets and additional AC breakers.

This expandable system has 25 year guaranteed UL listed solar panels, UL listed combiner box and we supply all the connectors from the panel to the box. You supply the conduit and wire from the box to the power center which is indoor rated. The 1,530 watt Off grid system is the only choice when you need a fully integrated off-grid system with pure sine wave inverter all pre-wired ready for you to add your own rack or select one of ours. With this pre-wired system you can save yourself thousands of dollars over the cost of hiring a contractor to install your system.

 

What's included:

  • 6 - 340 Watt Solar Panels (Canadian Solar or Mission Solar)
  • 1 - Outback FlexPower One FP1-1 Power Center Fully Assembled
  • Prewired AC and DC boxes with 120VAC Bypass and Type B Outlet
  • 250ADC breaker GFDI
  • 80 amp Power Center breaker
  • Outback VFXR3648-A Inverter
  • Remote Temperature Sensor
  • Outback Flexmax 80 Charge Controller
  • Flexnet DC and surge protector for 120V 60Hz applications.
  • MidNite MNPV-3, 3 Position Combiner Box w/Breakers
  • 2- 10 AWG - 30' Cable Extension (PV wire from panels to combiner)
  • 2 - 2/0 - 96" Battery Cable, Dual Kit (1 red, 1 black)
  • 7 - 2/0 - 8" Black/ Red Battery Interconnect Cables
  • 8 x Rolls Surrette S-550 428 AH 6v Batteries
  • DPW Low Profile Roof Ground Mount for 6 type G Modules

Lead Times for Shipping

Panels and balance of system ship in 3 - 5 business days after funds clear. OutBack FLEXpower™ ONE FP1-VFX3648 power centers are usually in stock but are subject to inventory availability. Because of the popularity of the FLEXpower™ ONE; allow 10 business days to ship. (Subject to Seasonal Increases)

Off Grid or Grid Tied

FLEXpower™ ONE FP1-VFXR3648A inverters are designed to work off-grid and also interact with the grid to back feed power.

Mounting and Battery Options

Roof or ground racks and batteries are included in the base price of the kit however there are other options available for mounting such as top of pole or the more economical rail systems to meet individual's specific property requirements. There are options available also for sealed  maintenance free batteries.

Other Materials Needed

Some additional items sourced from your local hardware store that you may need to purchase are: Conduit, appropriately sized electrical wire from the combiner box to the location of the power panel, some fasteners, sealant, grounding rod and wire to complete the final connection to your main panel or sub panel.

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information