| Content | SolarLand SWD 160-12P Portable solar panel
The SUNWANDERER Portable Series is designed to charge 12V Lead-Acid, GEL and AGM style batteries.
Specifications:
Rated Power (Pm) : 160W
Operating Voltage (Vmp) : 17.8V
Operating Current (Imp) : 8.99A
Open Circuit Voltage (Voc) : 21.3V
Short Circuit Current (Isc) : 9.71A
Power Tolerance : ±5%
Operating Temperature : -40°C~+85°C
Standard Test Conditions : Irradiance (E) -1000W/M2, AM 1.5 Spectrum, Panel Temp.(Tc) =25°C
Dimensions : 1005mm x 505mm x 35mm(39.57’’ x 19.88’’ x 1.38’’)
Components:
Description (Qty)
80w multi-crystalline silicon solar panel (2pcs)
10A Automatic smart solar change controller (1pc)
Rubber Corner Protector (8pcs)
Fold away adjustable support leg with guide rail (2pcs)
Carrying handle (1pc)
A 16’ cable that extends from the controller to the anderson connector (1pc)
A battery clamp adapter which is fitted with the anderson connectorfor quick disconnect with the 16' cable from the controller (1pc)
Carry-on bag (1pc) | 885W Off Grid Solar Electric System (with Top of Pole Mount)
**********SHIPPING INCLUDED IN PRICE********
This system is used by one of our customers who uses it to power two circuits in his home in the event of a blackout. It can be used equally well as an off grid system for an off grid home or cabin.
The system starts with the solar panels wired in two series strings on the pole mount to the combiner box mounted to the side of the pole. The combiner box is then wired to the Midnite Solar E-panel which houses all the necessary breakers and disconnects. The E-panel provides a mount for the Outback VFX3648 Inverter and the Outback Flexmax MPPT charge controller. The E-panel has all the necessary adaptors to contain wiring to and from the inverter making a very neat and easy installation.
The output of this system varies depending upon where you live and what time of the year it is. Expect more ouput in the summer (highest output period) and less in the winter (lowest output period).
Products Included:
4 x Canadian Solar CS6K-295M 295w Solar Panels
1 x GS Pole Top Mount for 4 x 295w Solar Panels
1 x Outback VFX3648 Off Grid Inverter Charger, 3600 Watt, 48 Volts 120 VAC/60 Hz Vented
1 x OutBack FLEXmax 60, FM60, MPPT Charge Controller, 60 amp, 12, 24, 36, 48, or 60 Volt
1 x OutBack Power MATE Surface Mount Digital Display and System Control
1 x Outback RTS Remote Battery Temperature Sensor
2 x DIN Rail 150VDC Breaker 10A
1 x Midnite Solar MNPV3 Combiner Box for 3 150VDC or 600VDC breakers
1 x DC Ground Fault Protection Circuit Breaker 63 Amp 150 VDC
1 x LA302DC Delta Lightning Arrestor to 0-300VDC
1 x Midnite Solar MNE-175AL-PLUS White Aluminum Outback Power Panel 175A INVERTER BREAKER w/ charge controller mount
6 x Grounding Lugs with Set Screws
1 x DIN Rail 150VDC Breaker 60A
1 x DIN Rail 150VDC Breaker 20A
2 x MC4 15 foot Array Output Cables
Items not included:
4 inch scedule 40 or 80 pole for mount. (Source locally at steel supply)
Wiring between combiner box and E-panel (Size dependant on distance)
Grounding wire (usually bare #6 copper stranded)
Batteries, battery interconnects and inverter cables (Batteries available here and cables available here)
Conduit and conduit fittings. ( Source locally at most hardware stores)
Please call to speak to a sales representative to learn about other options which may be available.
Shipping details: Most products take 10-14 days to be delivered. Batteries, module and mounting systems may be shipped by truck freight and usually take 1-2 weeks to be delivered.
NOTE: Always consult a licensed electrician before installing your electrical components.
| 885W Off Grid/ Grid-tie Solar Refrigeration Backup Power Kit w/ Prewired Power Center
This system can be used as both grid tie and/or off grid system.
This system is used to power a refrigerator for a week in the event of a blackout. It can be used equally well as an off grid system for an off grid home or cabin. The system is expandable up to 4000w of solar power.
The system starts with the 295w solar panels wired in one series string wired to the Outback FlexOne Power Panel which houses all the necessary breakers and disconnects. The power panel is prewired and easily hooks to the battery bank via included inverter/battery cables.
The new FLEXpower ONE System accommodates all the essential protective devices in a small space at a low installed cost for applications with modest power requirements such as cabins, chalets, homes, remote communication sites and backup power systems. Utilizing a compact design and an easy-to-install mounting bracket, the fully pre-wired and factory tested.
FLEXpower ONE includes a single inverter, AC and DC wiring boxes, a single FLEXmax 80 charge controller, MATE, HUB, FLEXnet DC and surge protector. The system is also equipped with battery and PV array breakers, a PV GFDI breaker, an input-output-bypass assembly, mounting locations for both AC GFCI Type B and EU Type F style outlets and additional AC breakers. FLEXpower ONE components carry all of the necessary ETL certifications allowing for a code compliant installation. Dimensions are 12.88 x 19.69 x 33.44 inches. Weight is 98 lbs.
Includes:
FLEXpower ONE, Prewired AC and DC boxes with 175VAC Bypass and Type B Outlet, 175ADC breaker, GFDI, 80 amp charge controller breaker, VFXR3648A, MATE2, HUB4, RTS, FLEXmax 80, FLEXnet DC and surge protector for 120V 60Hz applications
The output of the solar panels varies depending upon where you live and what time of the year it is. Expect more output in the summer (highest output period) and less in the winter (lowest output period).
Products Included in Kit:
|
Canadian Solar CS6P-295P 295W Mono Silver Frame Solar Panel
|
|
|
|
Panel Mount AC/DC Circuit Breakers 1A to 250A
- Specify DC Breaker 15A |
|
|
|
UPG UB-GC2 Sealed Lead Acid (AGM) Battery- 6 volt 200 amps |
|
|
|
MC4 Solarline 2 PV Array Output Cable 100' #10 AWG |
|
|
|
2/0 5' Black Battery Inverter Cable 2 lugs |
|
|
|
2/0 5' Red Battery Inverter Cable 2 lugs |
|
|
|
2/0 AWG 12" Black Battery Interconnect Cable 2 lugs |
|
|
|
FLEX1 VFX3648 FM80 3600W, 48V, Pre-wired OutBack Power Inverter & 80amp Charge Controller |
|
|
Items not included:
Mount for solar panels ( Please call for available options)
Grounding wire (usually bare #6 copper stranded)
Conduit and conduit fittings. ( Source locally at most hardware stores)
Please call to speak to a sales representative to learn about other options which may be available.
Shipping details: Most products take 10-14 days to be delivered. Batteries, module and mounting systems may be shipped by truck freight and usually take 1-2 weeks to be delivered.
NOTE: Always consult a licensed electrician before installing your electrical components.
|
1530W Flexpower Off-Grid Pre-Designed Solar System incl Mount and 24v 856AH Battery Bank
This expandable 1,530 watt off-grid system has a pre-wired power center that makes it easy to install. The OutBack Flexpower is pre-wired with all of the essential protective devices in the smallest possible space at the lowest installed cost making it ideal for applications with modest power requirements such as cabins, weekend get-a-way homes, and remote communication sites as well as back-up power systems homes. Utilizing an extremely compact design and an easy-to-install mounting bracket, the fully pre-wired and tested Flexpower ONE System is engineered for a quick installation, saving both time and money. The pre-wired power center comes with an OutBack charge controller already mounted. OutBack charge controllers have maximum power point tracking with an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from the 1,530 Watt solar array. With a 24v battery bank the FM80 charge controller can take up to 2,400w of solar power, however because we need to keep the series strings of panels in sets of three panels ( due to the Max Voc input of 150V to the charge controller) a total of 9 x 255w solar panels can be used with the FM80 charge controller.
Flexpower by Outback includes a single AC inverter, AC and DC wiring boxes, a single Flexmax battery charge controller, MATE monitor, HUB, Flexnet DC and lighting surge protector. All this wrapped up in a 1,560w off-grid kit with a small power center footprint. The Flexpower System is also equipped with battery and breakers, a GFDI breaker, an input-output-bypass assembly, mounting locations for both AC GFCI Type B and EU Type F style outlets and additional AC breakers.
This expandable system has 25 year guaranteed UL listed solar panels, UL listed combiner box and we supply all the connectors from the panel to the box. You supply the conduit and wire from the box to the power center which is indoor rated. The 1,530 watt Off grid system is the only choice when you need a fully integrated off-grid system with pure sine wave inverter all pre-wired ready for you to add your own rack or select one of ours. With this pre-wired system you can save yourself thousands of dollars over the cost of hiring a contractor to install your system.
What's included:
-
6 - 255 Watt Solar Panels (Canadian Solar)
-
1 - Outback FlexPower One FP1-1 Power Center Fully Assembled
-
Prewired AC and DC boxes with 120VAC Bypass and Type B Outlet
-
250ADC breaker GFDI
-
80 amp Power Center breaker
-
Outback VFX3524 Inverter or GVFX3524 Inverter
-
Remote Temperature Sensor
-
Outback Flexmax 80 Charge Controller
-
Flexnet DC and surge protector for 120V 60Hz applications.
-
MidNite MNPV-3, 3 Position Combiner Box w/Breakers
-
2- 10 AWG - 30' Cable Extension (PV wire from panels to combiner)
-
2 - 4/0 - 96" Battery Cable, Dual Kit (1 red, 1 black)
-
6 - 4/0 - 8" Black/ Red Battery Interconnect Cables
-
2- 4/0 - 12" Black/Black Battery interconnect cables.
-
8 x Rolls Surrette S-550 428 AH 6v Batteries
-
DPW Low Profile Roof Ground Mount for 6 type G Modules
Lead Times for Shipping
Panels and balance of system ship in 3 - 5 business days after funds clear. OutBack FLEXpower™ ONE FP1-GVFX3524 power centers are usually in stock but are subject to inventory availability. Because of the popularity of the FLEXpower™ ONE; allow 10 business days to ship. (Subject to Seasonal Increases)
Off Grid or Grid Tied
FLEXpower™ ONE FP1-GVFX3524 & FP1-GVFX3648 inverters are designed to work off-grid and also interact with the grid to back feed power. If you have a generator you should be aware that the GVFX3524 inverters will only sync with Honda EU generators because they produce pure sine wave power. If you intend to use your system completely off grid (No Grid Tie Ever), you may want to have us switch to the VFX3524 inverters for your FLEXpower™ ONE system at no additional charge to you because the VFX3524 will interface with a wider variety of generators. Should you choose to make that change, just notify us in the comment box at the time of checkout or when you are contacted by the technical consultant assigned to your purchase.
Mounting and Battery Options
Roof or ground racks and batteries are included in the base price of the kit however there are other options available for mounting such as top of pole or the more economical rail systems to meet individual's specific property requirements. There are options available also for sealed maintenance free batteries.
Other Materials Needed
Some additional items sourced from your local hardware store that you may need to purchase are: Conduit, appropriately sized electrical wire from the combiner box to the location of the power panel, some fasteners, sealant, grounding rod and wire to complete the final connection to your main panel or sub panel. |
1410W Outback Flexpower Grid Tie Emergency Solar Electric System 24VDC/120VAC
This expandable 1,410 watt grid tie system has a pre-wired power center that makes it easy to install. The OutBack Flexpower is pre-wired with all of the essential protective devices in the smallest possible space at the lowest installed cost making it ideal for applications with modest power requirements such as cabins, weekend get-a-way homes, and remote communication sites as well as back-up power systems homes. Utilizing an extremely compact design and an easy-to-install mounting bracket, the fully pre-wired and tested Flexpower ONE System is engineered for a quick installation, saving both time and money. The pre-wired power center comes with an OutBack charge controller already mounted. OutBack charge controllers have maximum power point tracking with an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from the 1410 Watt solar array.
Flexpower by Outback includes a single AC inverter, AC and DC wiring boxes, a single Flexmax battery charge controller, MATE monitor, HUB, Flexnet DC and lighting surge protector. All this wrapped up in a 1,410 watt off-grid kit with a small power center footprint. The Flexpower System is also equipped with battery and breakers, a GFDI breaker, an input-output-bypass assembly, mounting locations for both AC GFCI Type B and EU Type F style outlets and additional AC breakers.
This expandable system has 25 year guaranteed UL listed solar panels, UL listed combiner box and we supply all the connectors from the panel to the box. You supply the conduit and wire from the box to the power center which is indoor rated. The 1410 watt system is the only choice when you need a fully integrated off-grid system with pure sine wave inverter all pre-wired ready for you to add your own rack or select one of ours. With this pre-wired system you can save yourself thousands of dollars over the cost of hiring a contractor to install your system.
What's included:
-
6 - 235 Watt Solar Panels (Astronergy or Conergy)
-
1 - Outback FlexPower One FP1-1 Power Center Fully Assembled
-
Prewired AC and DC boxes with 120VAC Bypass and Type B Outlet
-
250ADC breaker GFDI
-
80 amp Power Center breaker
-
Outback GVFX3524 Inverter
-
Remote Temperature Sensor
-
Outback Flexmax 80 Charge Controller
-
Flexnet DC and surge protector for 120V 60Hz applications.
-
MidNite MNPV-3, 3 Position Combiner Box w/Breakers
-
10 AWG - 30' Cable Extension (PV wire from panels to combiner)
-
2 - 4/0 - 96" Battery Cable, Dual Kit (1 red, 1 black)
Mounting Options Available:
|
|
DPW Solar Low Profile Roof/Ground Mount for 6 type G Modules 37-42" x 61-67" |
|
$895.00 |
|
|
Power Fab Top of Pole mount for 6 Type-G Modules 37-42" x 61-67". |
|
$1,305.00 |
Battery Bank Options Available:
Please call us to discuss options and pricing. | 2040W Flexpower Off-Grid Pre-Designed Solar System incl Mount and 48v 400AH AGM Battery Bank
This expandable 2040 watt off-grid system has a pre-wired power center that makes it easy to install. The OutBack Flexpower is pre-wired with all of the essential protective devices in the smallest possible space at the lowest installed cost making it ideal for applications with modest power requirements such as cabins, weekend get-a-way homes, and remote communication sites as well as back-up power systems homes. Utilizing an extremely compact design and an easy-to-install mounting bracket, the fully pre-wired and tested Flexpower ONE System is engineered for a quick installation, saving both time and money. The pre-wired power center comes with an OutBack charge controller already mounted. OutBack charge controllers have maximum power point tracking with an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from the 2040 Watt solar array. With a 48v battery bank the FM80 charge controller can take up to 4000w of solar power, however because we need to keep the series strings of panels in sets of three panels ( due to the Max Voc input of 150V to the charge controller) a total of 12 x 340w solar panels can be used with the FM80 charge controller.
Flexpower by Outback includes a single AC inverter, AC and DC wiring boxes, a single Flexmax battery charge controller, MATE monitor, HUB, Flexnet DC and lighting surge protector. All this wrapped up in a 2040w off-grid kit with a small power center footprint. The Flexpower System is also equipped with battery and breakers, a GFDI breaker, an input-output-bypass assembly, mounting locations for both AC GFCI Type B and EU Type F style outlets and additional AC breakers.
This expandable system has 25 year guaranteed UL listed solar panels, UL listed combiner box and we supply all the connectors from the panel to the box. You supply the conduit and wire from the box to the power center which is indoor rated. The 2040 watt Off grid system is the only choice when you need a fully integrated off-grid system with pure sine wave inverter all pre-wired ready for you to add your own rack or select one of ours. With this pre-wired system you can save yourself thousands of dollars over the cost of hiring a contractor to install your system.
What's included:
- 6 - 340 Watt Solar Panels (Canadian Solar or Mission Solar)
- 1 - Outback FlexPower One FP1-1 Power Center Fully Assembled
- Prewired AC and DC boxes with 120VAC Bypass and Type B Outlet
- 250ADC breaker GFDI
- 80 amp Power Center breaker
- Outback VFXR3648-A Inverter
- Remote Temperature Sensor
- Outback Flexmax 80 Charge Controller
- Flexnet DC and surge protector for 120V 60Hz applications.
- MidNite MNPV-3, 3 Position Combiner Box w/Breakers
- 2- 10 AWG - 30' Cable Extension (PV wire from panels to combiner)
- 2 - 2/0 - 96" Battery Cable, Dual Kit (1 red, 1 black)
- 7 - 2/0 - 8" Black/ Red Battery Interconnect Cables
- 8 x Centennial CB6-400 AGM 400AH L16 Batteries
- DPW Low Profile Roof Ground Mount for 6 type G Modules
Lead Times for Shipping
Panels and balance of system ship in 3 - 5 business days after funds clear. OutBack FLEXpower™ ONE FP1-VFX3648 power centers are usually in stock but are subject to inventory availability. Because of the popularity of the FLEXpower™ ONE; allow 10 business days to ship. (Subject to Seasonal Increases)
Off Grid or Grid Tied
FLEXpower™ ONE FP1-VFXR3648A inverters are designed to work off-grid and also interact with the grid to back feed power.
Mounting and Battery Options
Roof or ground racks and batteries are included in the base price of the kit however there are other options available for mounting such as top of pole or the more economical rail systems to meet individual's specific property requirements.
Other Materials Needed
Some additional items sourced from your local hardware store that you may need to purchase are: Conduit, appropriately sized electrical wire from the combiner box to the location of the power panel, some fasteners, sealant, grounding rod and wire to complete the final connection to your main panel or sub panel. |
